| View previous topic :: View next topic |
| Author |
Message |
ADS1
Joined: 13 Oct 2003
Posts: 6
Location: Terry E. Kiser
|
| Posted: Sun Oct 19, 2003 9:25 pm Post subject: |
|
|
| I need some help in mounting a scope on my TC Encore. I can't get bore sighted. The scope crosshair is higher than the bore and I am out if adjustment. I have put on high mount scopr rings. If I out on medium mount scope rings, will this help? This has happened with both a Leopold and Simmon Atec scope. Any help will be appreciated. |
|
| Back to top |
|
H2
Joined: 26 Oct 2003
Posts: 1
|
| Posted: Mon Oct 27, 2003 2:25 pm Post subject: |
|
|
| High, med or low mount rings won't change anything. They are used for the different objective lens sizes. The general consenses is to use the lowest rings possible to be as close to the bore axis as possible. If you can't get enough elevation etc. for bore sighting you may need to use shims for your mounts or check the base fit to the barrel/receiver. |
|
| Back to top |
|
| |
