| View previous topic :: View next topic |
| Author |
Message |
Trophy_Hunter_41
Joined: 05 Dec 2006
Posts: 11
Location: Perch lake, Sakatchewan, Canada
|
| Posted: Mon Mar 26, 2007 8:52 pm Post subject: Muzzleloader Kit |
|
|
| Im thinking about Buying a Traditions kentucky Muzzleloder Kit. But i would like to now how barrel bluing is done and how hard it is? |
|
| Back to top |
|
ADKBEAR
Joined: 16 Sep 2003
Posts: 669
Location: Central NY
|
| Posted: Wed Mar 28, 2007 6:44 am Post subject: |
|
|
I built a 50 cal hawkins from a kit when I was in high school.
I bought a bluing kit from a gun shop, it was a lot of work and the results were poor at best. What I would recomend is to prep the barrel and get it ready for blueing then take it to a reputable gunsmith for the bluing process.
Another option is traditional "browning" and I understand that this is a much easier process for the do-it yourselfer??? |
|
| Back to top |
|
HsmMiner
Joined: 26 Dec 2006
Posts: 24
Location: Levack, Ontario, Canada
|
| Posted: Mon Apr 23, 2007 5:11 pm Post subject: |
|
|
| I made my flinter from the same kit that you are considering. They sure do make a fine rifle. Bluing is a little bit more tricky than browning a barrel. First you have to degreese your barrel repeatedly. I used dish soap and hot water, over and over. When I thought it was done, I cleaned it one more time. Then I used a cold bluing kit and submerged the barrel. It turned out quit well. |
|
| Back to top |
|
| |
