Can any one tell me if I can put "See Thru Scoop Rings" on a CZ 550 Safari 375 H&H Mag.? I would like to be able to use both a Scoop & the open sights on this rifle! Any Thoughts or any body done this? Thanks-Tim.
Before you get the rings/mounts you have to know or have the scope that you are going to mount. 30 mm or 1 " tube ? length, may require off set rings if scope too long/too short. If you are near a good gun shop/ gunsmith and tell them what you want, a set of see-through rings for your rifle BUT you must have scope info.
I never seen a rifle that could be scope equipped that Weaver didn't have a mounting system for that model., so it's available
You may want to post in the Optics section, someone may have the exact info infront of them.
If I find the exact info, I'll attach it here for you.
Here's the USA contact address, phone,email, whatever. I would ask their opinion on see-thru mounts. See thrus may not be recommended because of the heavy recoil or they should be able to suggest the product to use. I have no experience with the heavy recoil rifles, I know that there are bases designed for heavy magnum calibres, so I'm just kinda wondering
Want a quick and inexpensive call for Moose? Take an empty 32 ounce coffee can, and make a small slit in the bottom, only about a quarter inch. Then, take one of those really big red rubber bands, the ones that go around big folders. Cut the rubber band to make one long piece.
Now, thread one end of the band and tie a knot on the outside of the can so it won't pull through. Cut the band off on the other side so it is even with the top of the can.
Now, wet your finger,...