9 replies [Last post]
Offline
Location: cheyenne wyoming
Joined: 08/17/2009
Posts: 52
inline 50. bullet mold

hey guys looking for some sugestions on a good bullet mold for my 50. inlines from what i understand around 300gr is the best balistics for out to 200yrds want to get away from buying the saboted bullets and get one load i can constantly relay on

thanks yall

Offline
Location: cheyenne wyoming
Joined: 08/17/2009
Posts: 52
inline 50. bullet mold

hello anyone hello Think it sure is dark in here

Offline
Location: Bavaria, Germany
Joined: 10/06/2007
Posts: 274
inline 50. bullet mold

Hi maddawg!

Not dark here, but most of the inlineshooters use these sabot bullets. But you are right a selfcast lead bullet will work also. I would recommend a LEE mould for Minie bullet or a maxiball. If you use the inliner only for hunting buy the Hornady Great Plains Bullets!

Regards

Kirrmeister

Offline
Location: cheyenne wyoming
Joined: 08/17/2009
Posts: 52
inline 50. bullet mold

thanks kirr got a batch of bullets from a friend will let yall know how it works out thanks again bud

Offline
Location: cheyenne wyoming
Joined: 08/17/2009
Posts: 52
inline 50. bullet mold

did a quick test lee molded bullets 320 grain they were to easy to load dont think it gas sealed good enough ..resultes werent good but will do some more testing sabot bullets are getting out of hand with cost if u do the practice shooting you should it will cost to much Brick Wall,)

Offline
Location: Bavaria, Germany
Joined: 10/06/2007
Posts: 274
inline 50. bullet mold

Hi maddawg,

you are right with the sabots as long as they are jacketed, but there are real cheap lead hp sabots. Take them to have fun!

Regards

Kirrmeister

Offline
Location: Mass.
Joined: 11/12/2009
Posts: 2
50 cal REAL mold

I have been having good luck with a 50 Cal. REAL mold from lee. It comes in two weights. 250 gr. and 320 gr. I lub and size with SPG. that said you should not push any lead bullet over about 1800 and my go to load is 75 gr. of 777. it sure punches a nice hole in a paper target. Load easy shot to shot without cleaning. I have not shot this much over 50 yards but the gun I am using has iron sights.

Offline
Location: Bavaria, Germany
Joined: 10/06/2007
Posts: 274
inline 50. bullet mold

I thinka conical can be shooten adequat out of a short ROT barrel as a sabot. A normal hunting distamce in the forest is about 50-80 meters.

Regards

Kirrmeister

Offline
Location: United States
Joined: 10/03/2009
Posts: 5
inline 50 bullet mold

I currently wear Mission BSX inline pants. The waist is to big for me. I wear size XL, but need to downsize to size L. The only criticism I have with the BSXs is their bulkiness. Can anyone recommend a Mission inline pant that is less bulky? Thanks a lot

Location: Utah
Joined: 02/24/2003
Posts: 596
inline 50. bullet mold

Have you considered using powerbelts? You get a lot of the advantages of a sabot but keep a true .50 cal. I've shot the 295's out to 100 yds with great accuracy. Since I shoot open sites I don't shoot beyond 100 yds. I use 100 grains of 777 with that load.

Related Forum Threads You Might Like

ThreadThread StarterRepliesLast Updated
Inline Vs Trational MuzzleloaderCritter1301/09/2012 08:50 am
Lee REAL, Ball-et, or Maxi Short (58)RevHoover106/25/2014 13:33 pm
.512 bullet mold wantedgroovy mike102/28/2011 10:45 am
Bullet for BearRockmonky206/05/2010 21:49 pm
Do you have to "CURE" modern inline muzzleoader bahawkeye2701001/07/2009 21:33 pm