No replies
Offline
Location: Southern Kalifornia
Joined: 03/18/2008
Posts: 14
BowTrix Bow Press

For Sale… IS A NEWLY BUILT COMPOUND BOW PRESS !!! This is by far the best deal out there, price and quality and toughness. All Stainless Steel Hardware, no hardware store u-bolts.
Please keep in mind, that when you buy something at a reduced price you will normally receive reduced quality, my bow presses are not the cheapest, and they are not intended to be the cheapest. My bow presses were build with nothing but quality in mind, from the 1/8” thick all steel square tubing to the Stainless Steel hardware, to the all steel 7/16” eyebolts that will never fail, even in our paint our presses are primered, and we use a automotive grade lacquer to paint each one, again the presses are not painted with spray paint bought from Home Depot. Each bow press is hand built and machined by myself, due to the quality of this press, the BowTrix Bow Press will be given a lifetime warranty, if any part fails, and I will replace the part or the press. The hydraulic jack is only warranted for 2 years, if it fails in that 2 years period, send the old one back I will send you another one immediately, no questions asked. Materials and shipping.
This Press will press the new Parallel limb Bows like the Bears, we have pressed Bear Truths, and in the press, in one of the pics is my ROSS 337 , we have pressed Parkers, ROSS’s and PSE’s, Diamond Bowtech, and many, many others. We have pics of Parkers, Bears, ROSS’s, and PSE ‘s in the press, pm me and I will email them upon request. The pic shows a ROSS CR337 in the press.
The base is 38" long with two 10" swing arms for the pressing action and a 2 Ton Hydraulic Jack that uses a heavy duty chain and wire rope all tied together with stainless steel hardware. We also incorporate solid steel welded eye bolts, they will not fail. This press is completely and totally adjustable to fit your bows length. The BOWTRIX Press has a 38" Frame and is 1/8” thick and the 10" Swing arms are 1/8" thick steel square Tubing " The BOWTRIX Bow Press is Heavy Duty !! and sturdy. The BOWTRIX Press comes with a 2-Ton Hydraulic Jack. There are plenty of adjustment holes to get the round pressing bars into the exact location you will need them in.
THE BOWTRIX PRESS IS LIGHT ENOUGH AND COMPACT ENOUGH TO TAKE ALONG ON YOUR HUNTING TRIPS OR TARGET SHOOTING ANYWHERE AND ELIMINATE THE WORRY OF HAVING A BOW FAILURE IN THE MIDDLE OF NO WHERE.
This press is built by a avid bowhunter and a person (myself) with a passion for archery, when you purchase this press it is not coming from a mass production center, it is coming from a small family owned bow shop, in our bow shop we tune bows for a living and work on just about any bow. And I can tell you this press gets used over and over. The one you see pictured is my press in my shop, and it is used on a daily basis. For more oics view my Ebay auctions, under bow presses.
I will offer this press for $189.00 shipped to your front door, shipping included, I accept PayPal, or money orders for payment. Also check out the press on Ebay, you can get it even cheaper in some cases.

PayPal: reikidreamr@aol.com
MO or check: Joe McWilliams P.O. Box 17, MiraLoma, Ca 91752
Thanks, Joe
[img]http://i291.photobucket.com/albums/ll320/joemcwilliams/S7302030.jpg[/http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=160253543479&ssPageName=STRK:MESE:IT

Related Forum Threads You Might Like

ThreadThread StarterRepliesLast Updated
The answering machineCa_Vermonster211/09/2010 12:14 pm
Redding Ultramag Press or Forster CoAx????Turdmucklydunn311/08/2008 07:34 am
Press questionsjigman1101/16/2006 09:23 am
First reloading press?rogie2008/19/2008 09:25 am
Press Hammers Gibbs for Prepackaged Questionsexpatriate307/02/2009 13:50 pm