No replies
JJD
JJD's picture
Offline
Location: Right Side WA state
Joined: 11/07/2008
Posts: 208
Belding & Mull

A machine shop in Philipsburg, PA built one of the finest powder measures produced.
The "Belding & Mull visable powder measure"
It cuts a finer, more consistant charge of extruded (long grain powders) than any I've ever seen. I've seen a good number of them.
It was used by many bench rest shooters some years back.

The good news is that the new owners of the shop are putting the measure back into production again. They hope to have them for sale by the end of this year.
You can still find one of these units on the on-line auction sites on occasion.

They did get what was left over in parts and some are available. I just purchased a new super magnum charge tube 40 to 135 gr. I've wanted one for years.
It's really not that big a deal as if I wanted an 8o gr charge, I just cut 40 twice. Sadly enough I paid for the charge tube what I paid for the entire measure.

If you are interested in a measure or need parts for one you have;
Belding & Mull
1878 Port Matilda Hwy
Philipsburg,PA 16866

phone# is 814-342-1800

Related Forum Threads You Might Like

ThreadThread StarterRepliesLast Updated
My 2010 Elk Camp - "The Complete Story"HeavyC1012/23/2010 10:41 am