Here is picture on left of the 12ga hollowpoint slug
with plastic tip. Makes it streamlined, good for 300yds.
And still will expand good thin skinned game-deer.
I put tip in with glue gun in few seconds, and
shaped a point on it with trim knife. Ed
I also have two other cartridges with my name
on them that I am promoting. They are my 700HE
and my 585BHE. They both belted straight cases.
Montana Rifle company is coming out with their
big PH action and some guys will be doing my
cases in them.
Info on the 585BHE. It will work in
any gun that handles 505 Gibbs like Enfield, CZ,
Ruger,etc.Mine is in Enfield.Here is picture of
of one next to Trex. And mine holds 15gr more
powder than that Trex case. 585BHE will do 750
grain from 1800 to 2800 fps in my Enfield.
Anyone interested setting up a gun, contact me
I will furnish reamer and 15 free cases. Cases are
headstamped. When done return reamer to me, for
the next guy. I will keep them sharpened. After a
few guys have guns we all will get together with
others wanting some and get a run of brass made.
These cases are all drawn high pressure brass.
I'd like guys to ask for reamer when gun is going
to be ready to chamber, that way reamers get the
most guns done in shortest time.Ed
On Fri May 2 8pm on the Science Channel ,they will have
an article about the heavy barrel cannons that shoot
the 12ga size cases for bomb disposal.They are the same as
our 12GA FH case,when resized in my dies and are shown
in this thread a couple months back in picture.
It will show them using them for bomb disposal. Ed
Here is picture of a sectioned 8ga plastic case
showing how heavy and strong it is built. The
plastic is one piece compressioned formed and
the sides of the cases are twice as thick as
12ga cases.You can see the double thickness
of the base cup. Ed
I was asked how I got 8ga heavy barrel so quick.
First it is smoothbore, second a 110 bucks total shipping and all.
First I bought a 1.5 inch dia 4130 alloy, heat treated, shaft,
32" long. Then I had a deep hole drilling company drill
a .832" hole in it. Came out centered on both ends.
Then after it got here I used cylinder hone to polish
the inside of the bore. Threaded it, chambered it, and put
in the Enfield bolt action. The heat treating it had was just like
the barrel stock that barrel guys get. Ed.
For those wanting to see video of the 12GA FH in
the Savage busting big pail of water, one of the
kids posted it on Youtube- Titled "Grampa's Cannon".
I just found out that it is on there.
This was the video that the still pictures posted
before, was taken from. They have the sound
muted so as not to hurt camera sound system. Ed
Load of 12 triple ought buckshot in 8ga. They are
70gr each, total 840 gr, and over 2000 fps with
125 gr of 4759. Ed
Here is URL for the waterpail busting video above-- http://www.youtube.com/watch?v=rUNHszY4ACM
There are now two videos of 12GA FH on YouTube,
exploding big heavy walled pails of water.
The "Grampa's Cannon" one with a long view,
and "Grandpa's First Shot" a closeup video,
the first one, that shows how the top of heavy
shelf got bent. Later kids will do videos showing
muzzle blast and recoil.
Also the 3 ought buckshot from the 8ga load
above goes through 2" hardwood ok. I will test
8ga on waterpail also, to see what happens. Ed
As a Taxidermist I look at hundreds of Whitetail Bucks every year. I know that I have seen many different ways people judge the size of racks on live deer. I think for the most part they all are pretty close. I'm going to give you some measurements that I have noticed being right on in just about every deer. We have used it in the last couple years and have only been off by about 5-6 inches. We do study the deer while bowhunting so we get a little more time to look at them....